![[Translate to Anglais:] LEVIAT a CHR company](/fileadmin/_processed_/0/5/csm_logo-leviat-white_bf42d08d02.png){kind=logo}
Leviat, a CRH company, is a global leader in connecting, fixing, lifting and anchoring technology for the construction industry.
Leviat’s engineered products and innovative construction solutions are used in a variety of market segments from residential to infrastructure, enabling users to build better, stronger, safer and faster.
3 000
employees
+60
sites worldwide
4
production on 4 continents
+30
sales in +30 countries
Blankenberge will soon have a brand-new sports complex and Leviat was allowed to contribute to
that.
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
We imagine, model and make engineered products and innovative construction solutions for a dynamic industry. We support our partners in the long term to build better, safer, stronger and faster and help turn awe-inspiring architectural visions into reality.
Ankrodal is a made to measure standby, intended for passing pipes and technical sheaths (electric sheaths, HVAC, water, etc.) after casting the floor.
❶ Formwork belt in made of 0.5 mm thick sheet steel with a dovetail profile offering perfect anchoring in concrete, as well as good take-up between the floor concrete and the keying concrete. The rigidity of the box, ensured by the sheet's shape, guarantees proper resistance to the concrete load in the floor casting phase
❷ Cover in OSB 3 reconstructed wood, with a thickness of 18 mm (designed and qualified for use in humid environment - see the technical sheet). The cover rests on a 20 mm wide shoulder on the 4 sides of the formwork belt. An identification label is affixed under the cover to indicate the dimensions. The cover is flush with the concrete's surface to avoid interfering with surfacing, and to prevent an employees from tripping
❸ Formwork base made of 2 plates of cross cell polypropylene plates. These plates have a thickness of 10 mm. They are screwed to the formwork belt
❹ Meshed polypropylene sheets intended to hold the OSB cover through handling operations, then to reinforce the bottom during the concrete keying phase in case of accidental bearing in this zone.
The meshing is always smaller than 15 cm, hence guaranteeing very high strength of the bottom
This product was qualified by tests performed in the presence of SOCOTEC
Project : De Sportdoze
Used products : Scaldex Sumo façade supports, Halfen FPA façade plate anchors, Plaka Cemflex watertight sheet, Plaka Colmarub S, Plaka Swell plugs, Plaka Spacers
City : Blankenberge
In collaboration with : ESSA ingenieurs- & architectenbureau
The RTBF gets a new home! The French-language broadcaster will get a new building with 7 floors above ground and another 3 floors below ground + a logistics building. The entire complex will house an editorial office, meeting rooms, all the studios and the restaurant.
Read more
The "Gulden Roos", a project in Bruges nestles in an environment of alleys, squares and a central park garden. The project uses the same brick in different versions so that the whole residential block exudes a sense of unity.
Read more
Ankrodal is a made to measure standby, intended for passing pipes and technical sheaths (electric sheaths, HVAC, water, etc.) after casting the floor.
❶ Formwork belt in made of 0.5 mm thick sheet steel with a dovetail profile offering perfect anchoring in concrete, as well as good take-up between the floor concrete and the keying concrete. The rigidity of the box, ensured by the sheet's shape, guarantees proper resistance to the concrete load in the floor casting phase
❷ Cover in OSB 3 reconstructed wood, with a thickness of 18 mm (designed and qualified for use in humid environment - see the technical sheet). The cover rests on a 20 mm wide shoulder on the 4 sides of the formwork belt. An identification label is affixed under the cover to indicate the dimensions. The cover is flush with the concrete's surface to avoid interfering with surfacing, and to prevent an employees from tripping
❸ Formwork base made of 2 plates of cross cell polypropylene plates. These plates have a thickness of 10 mm. They are screwed to the formwork belt
❹ Meshed polypropylene sheets intended to hold the OSB cover through handling operations, then to reinforce the bottom during the concrete keying phase in case of accidental bearing in this zone.
The meshing is always smaller than 15 cm, hence guaranteeing very high strength of the bottom
This product was qualified by tests performed in the presence of SOCOTEC
