![[Translate to Anglais:] LEVIAT a CHR company](/fileadmin/_processed_/0/5/csm_logo-leviat-white_bf42d08d02.png){kind=logo}
Leviat, a CRH company, is a global leader in connecting, fixing, lifting and anchoring technology for the construction industry.
Leviat’s engineered products and innovative construction solutions are used in a variety of market segments from residential to infrastructure, enabling users to build better, stronger, safer and faster.
3 000
employees
+60
sites worldwide
4
production on 4 continents
+30
sales in +30 countries
Blankenberge will soon have a brand-new sports complex and Leviat was allowed to contribute to
that.
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
We imagine, model and make engineered products and innovative construction solutions for a dynamic industry. We support our partners in the long term to build better, safer, stronger and faster and help turn awe-inspiring architectural visions into reality.
Threshold support system
Solea-Fix allows the easy fitting of your stone thresholds when the facing does not allow loads to be taken up.
Leveraging our long experience in the field, we have standardised our support range to ensure you will be served in the best possible times. In addition to the dead weight of the stone or concrete element, these brackets are calculated by considering a man's weight at the tip.
The following assumptions were taken into account when calculating the dimensions of the threshold supports:
Material: galvanised steel
9 standard types according to the thickness of the insulator and height difference
Standard insulation thickness Ls between 120 and 230 mm
Standard height difference A between 0 and 100 mm
Always fitted with a Thermi-K thermal switch plate
Thermi-K: thickness = 6 mm - ʎ = 0.16 W/mK
Fastening is performed at 80 mm minimum from the upper edge of the carrying structure.
Fastening is carried out through the Solea-Fix slot, using the M12x140 mm galva threaded rod (+ nut and washer) to be sealed into the supporting structure with the Ankrochim SF800+ chemical anchorage (not included).
After fitting the threshold on the Solea-Fix, a pin (M8x25 mm bolt - not supplied) must be sealed in the underside of the threshold, through the 9 mm diameter hole in the Solea-Fix.
The supporting structure to which the Solea-Fix are to be fastened must be:
- solid concrete block
- hollow concrete block, filled with mortar
- sand-lime block
- reinforced concrete
Check that the blocks in which the Solea-Fix are anchored cannot tip over.
Project : De Sportdoze
Used products : Scaldex Sumo façade supports, Halfen FPA façade plate anchors, Plaka Cemflex watertight sheet, Plaka Colmarub S, Plaka Swell plugs, Plaka Spacers
City : Blankenberge
In collaboration with : ESSA ingenieurs- & architectenbureau
The RTBF gets a new home! The French-language broadcaster will get a new building with 7 floors above ground and another 3 floors below ground + a logistics building. The entire complex will house an editorial office, meeting rooms, all the studios and the restaurant.
Read more
The "Gulden Roos", a project in Bruges nestles in an environment of alleys, squares and a central park garden. The project uses the same brick in different versions so that the whole residential block exudes a sense of unity.
Read more
Threshold support system
Solea-Fix allows the easy fitting of your stone thresholds when the facing does not allow loads to be taken up.
Leveraging our long experience in the field, we have standardised our support range to ensure you will be served in the best possible times. In addition to the dead weight of the stone or concrete element, these brackets are calculated by considering a man's weight at the tip.
The following assumptions were taken into account when calculating the dimensions of the threshold supports:
Material: galvanised steel
9 standard types according to the thickness of the insulator and height difference
Standard insulation thickness Ls between 120 and 230 mm
Standard height difference A between 0 and 100 mm
Always fitted with a Thermi-K thermal switch plate
Thermi-K: thickness = 6 mm - ʎ = 0.16 W/mK
Fastening is performed at 80 mm minimum from the upper edge of the carrying structure.
Fastening is carried out through the Solea-Fix slot, using the M12x140 mm galva threaded rod (+ nut and washer) to be sealed into the supporting structure with the Ankrochim SF800+ chemical anchorage (not included).
After fitting the threshold on the Solea-Fix, a pin (M8x25 mm bolt - not supplied) must be sealed in the underside of the threshold, through the 9 mm diameter hole in the Solea-Fix.
The supporting structure to which the Solea-Fix are to be fastened must be:
- solid concrete block
- hollow concrete block, filled with mortar
- sand-lime block
- reinforced concrete
Check that the blocks in which the Solea-Fix are anchored cannot tip over.
