![[Translate to Anglais:] LEVIAT a CHR company](/fileadmin/_processed_/0/5/csm_logo-leviat-white_457f44c815.png){kind=logo}
Leviat is a global leader in connecting, fixing, lifting and anchoring technologies for the construction industry.
Our engineered products and innovative solutions are used across a wide range of sectors, from residential to infrastructure, helping customers build better, stronger, safer and faster.
3 000
employees
+60
sites worldwide
4
production on 4 continents
+30
sales in +30 countries
Blankenberge will soon have a brand-new sports complex and Leviat was allowed to contribute to
that.
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
We imagine, model and make engineered products and innovative construction solutions for a dynamic industry. We support our partners in the long term to build better, safer, stronger and faster and help turn awe-inspiring architectural visions into reality.
The Thermoshim is a thermal break plate that increases the thermal resistance of the Korbo masonry supports. Fit these synthetic plates between the Korbo brackets and the supporting structure.
Benefits
Galvanized carbon steel (λ = ± 50 W/mK) has a thermal conductivity coefficient higher than that of stainless steel (λ = ± 15 W/mK). This is why, in the case of galvanized Korbos, we recommend to always place Thermoshim plates between the brackets and the load-bearing structure to limit heat loss.
- Ensure that the Thermoshims and other filling plates are sufficiently high so that the two points of contact, namely the height regulating plate at the top and the adjustment bolt at the bottom, are fully supported.
- If the Thermoshims extend too far beyond the supporting structure, the outer 40 mm may be broken off, provided that the two points of contact are still fully supported.
- A maximum of two Thermoshims or other filling plates are allowed behind the height regulating plate.
- Starting at a total of 10 mm of filling, an M16 anchor bolt must be used.
- In total, no more than 12 mm may be filled without additional verification by the Leviat engineer. Please contact us if you have any questions.
- Installation instructions for Korbo and Sumo masonry supports are available on the website. Always respect the anchoring instructions in the technical file that Leviat prepares for each individual project.
- Use only filling plates supplied by Leviat.
The Peridot Park project in Uccle involves the large-scale conversion of two former office buildings into 84 luxury apartments. The project is being carried out by Herpain Entreprise on behalf of Koramic Real Estate. The old metal facades are being replaced with contemporary brick architecture…
Read more
Project : De Sportdoze
Used products : Scaldex Sumo façade supports, Halfen FPA façade plate anchors, Plaka Cemflex watertight sheet, Plaka Colmarub S, Plaka Swell plugs, Plaka Spacers
City : Blankenberge
In collaboration with : ESSA ingenieurs- & architectenbureau
The RTBF gets a new home! The French-language broadcaster will get a new building with 7 floors above ground and another 3 floors below ground + a logistics building. The entire complex will house an editorial office, meeting rooms, all the studios and the restaurant.
Read more
The Thermoshim is a thermal break plate that increases the thermal resistance of the Korbo masonry supports. Fit these synthetic plates between the Korbo brackets and the supporting structure.
Benefits
Galvanized carbon steel (λ = ± 50 W/mK) has a thermal conductivity coefficient higher than that of stainless steel (λ = ± 15 W/mK). This is why, in the case of galvanized Korbos, we recommend to always place Thermoshim plates between the brackets and the load-bearing structure to limit heat loss.
- Ensure that the Thermoshims and other filling plates are sufficiently high so that the two points of contact, namely the height regulating plate at the top and the adjustment bolt at the bottom, are fully supported.
- If the Thermoshims extend too far beyond the supporting structure, the outer 40 mm may be broken off, provided that the two points of contact are still fully supported.
- A maximum of two Thermoshims or other filling plates are allowed behind the height regulating plate.
- Starting at a total of 10 mm of filling, an M16 anchor bolt must be used.
- In total, no more than 12 mm may be filled without additional verification by the Leviat engineer. Please contact us if you have any questions.
- Installation instructions for Korbo and Sumo masonry supports are available on the website. Always respect the anchoring instructions in the technical file that Leviat prepares for each individual project.
- Use only filling plates supplied by Leviat.
