![[Translate to Anglais:] LEVIAT a CHR company](/fileadmin/_processed_/0/5/csm_logo-leviat-white_bf42d08d02.png){kind=logo}
Leviat, a CRH company, is a global leader in connecting, fixing, lifting and anchoring technology for the construction industry.
Leviat’s engineered products and innovative construction solutions are used in a variety of market segments from residential to infrastructure, enabling users to build better, stronger, safer and faster.
3 000
employees
+60
sites worldwide
4
production on 4 continents
+30
sales in +30 countries
Blankenberge will soon have a brand-new sports complex and Leviat was allowed to contribute to
that.
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
We imagine, model and make engineered products and innovative construction solutions for a dynamic industry. We support our partners in the long term to build better, safer, stronger and faster and help turn awe-inspiring architectural visions into reality.
The Isotec RT+ ITE thermal break is a reinforcement system with the main function of eliminating thermal bridges caused by structure elements overhanging reinforced concrete structures (balconies, cornices, canopies, etc.).
The Isotec RT+ ITE break forms a load-bearing connecting element between concrete construction elements. The heart of the Isotec elements is made of an insulation board in PIR or mineral wool. The insulation board is crossed by stainless steel bars. This reinforcement is cast in the concrete on either side of the insulator, and therefore connects the two construction elements
The Isotec RT+ ITE thermal break must always be planned at the beginning of a project to ensure the insulator remains continuous beside the corbels.
Isotec is an element which is stable and rugged due to its composition. Therefore, it is highly resistant and withstands transport and worksite handling conditions very well. Composed of mineral wool, it offers fire resistance exceeding 90 minutes. The compression studs offer additional safety in terms of anchoring in the two concrete elements.
1. Check that the Isotec elements have not been damaged during transport or storage, and comply with the approved calculation note
2. Identify the elements to be placed on your balcony, based on the calculation note supplied by our design office
A technical and financial study is offered by our technical and commercial department once the following information has been received:
/Datum level map
/Cross-section at the overhang point
/In certain cases, the values calculated for the cutting force and bending moment as determined by the project's design office, while specifying whether these values are weighted or not.
Before initiating production, the calculation note issued shall be approved by the project's design office. Special made-to-measure elements may be produced in our workshops.
Once fitted in our workshops, the Isotec elements are carefully placed in secured baskets, protected by a plastic cover to prevent any damage during transport.
A thermal survey of our elements integrated into your building can be performed upon request.
Project : De Sportdoze
Used products : Scaldex Sumo façade supports, Halfen FPA façade plate anchors, Plaka Cemflex watertight sheet, Plaka Colmarub S, Plaka Swell plugs, Plaka Spacers
City : Blankenberge
In collaboration with : ESSA ingenieurs- & architectenbureau
The RTBF gets a new home! The French-language broadcaster will get a new building with 7 floors above ground and another 3 floors below ground + a logistics building. The entire complex will house an editorial office, meeting rooms, all the studios and the restaurant.
Read more
The "Gulden Roos", a project in Bruges nestles in an environment of alleys, squares and a central park garden. The project uses the same brick in different versions so that the whole residential block exudes a sense of unity.
Read more
The Isotec RT+ ITE thermal break is a reinforcement system with the main function of eliminating thermal bridges caused by structure elements overhanging reinforced concrete structures (balconies, cornices, canopies, etc.).
The Isotec RT+ ITE break forms a load-bearing connecting element between concrete construction elements. The heart of the Isotec elements is made of an insulation board in PIR or mineral wool. The insulation board is crossed by stainless steel bars. This reinforcement is cast in the concrete on either side of the insulator, and therefore connects the two construction elements
The Isotec RT+ ITE thermal break must always be planned at the beginning of a project to ensure the insulator remains continuous beside the corbels.
Isotec is an element which is stable and rugged due to its composition. Therefore, it is highly resistant and withstands transport and worksite handling conditions very well. Composed of mineral wool, it offers fire resistance exceeding 90 minutes. The compression studs offer additional safety in terms of anchoring in the two concrete elements.
1. Check that the Isotec elements have not been damaged during transport or storage, and comply with the approved calculation note
2. Identify the elements to be placed on your balcony, based on the calculation note supplied by our design office
A technical and financial study is offered by our technical and commercial department once the following information has been received:
/Datum level map
/Cross-section at the overhang point
/In certain cases, the values calculated for the cutting force and bending moment as determined by the project's design office, while specifying whether these values are weighted or not.
Before initiating production, the calculation note issued shall be approved by the project's design office. Special made-to-measure elements may be produced in our workshops.
Once fitted in our workshops, the Isotec elements are carefully placed in secured baskets, protected by a plastic cover to prevent any damage during transport.
A thermal survey of our elements integrated into your building can be performed upon request.
