![[Translate to Anglais:] LEVIAT a CHR company](/fileadmin/_processed_/0/5/csm_logo-leviat-white_bf42d08d02.png){kind=logo}
Leviat, a CRH company, is a global leader in connecting, fixing, lifting and anchoring technology for the construction industry.
Leviat’s engineered products and innovative construction solutions are used in a variety of market segments from residential to infrastructure, enabling users to build better, stronger, safer and faster.
3 000
employees
+60
sites worldwide
4
production on 4 continents
+30
sales in +30 countries
Blankenberge will soon have a brand-new sports complex and Leviat was allowed to contribute to
that.
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
We imagine, model and make engineered products and innovative construction solutions for a dynamic industry. We support our partners in the long term to build better, safer, stronger and faster and help turn awe-inspiring architectural visions into reality.
Rigid joint covers for façades, walls and ceilings.
Extruded PVC or aluminium profile with dovetail for fastening using clips. The joint cover system is designed for indoor or outdoor wall and ceiling joints, in continuity with the floor joints.
If you have any questions, please contact your sales engineer, who will guide you in choosing the right joint cover.
2. Jointofeu bead
The Jointofeu bead is composed of silicate-based mineral fibres (bio soluble version) held in a glass braid. It is used to caulk the expansion joints in buildings. Fitting fire break joints between two elements allows the preservation or restoration of the fire resistance of the wall beside these joints.
The bead:
- does not absorb humidity
- is insensitive to all usual aggressive chemical agents
- contains no asbestos
- chemically neutral, does not degas any noxious gases in case of fire
The bead is glued to at least one of the joint lips with Jointofeu glue planned to this effect.
Preparation
- Position the clips by sliding them into the dovetail
- Position the alignment nipples
Fitting
- Position the profile fitted with clips opposite the space to fill
- Clear any formwork element opposite each clip:
by 10 x 40 mm for 15-35 clips
by 20 x 60 mm for 35-80 clips
- By pressing the hand on the profile, embed the clips so that the profile is pressed perfectly
Project : De Sportdoze
Used products : Scaldex Sumo façade supports, Halfen FPA façade plate anchors, Plaka Cemflex watertight sheet, Plaka Colmarub S, Plaka Swell plugs, Plaka Spacers
City : Blankenberge
In collaboration with : ESSA ingenieurs- & architectenbureau
The RTBF gets a new home! The French-language broadcaster will get a new building with 7 floors above ground and another 3 floors below ground + a logistics building. The entire complex will house an editorial office, meeting rooms, all the studios and the restaurant.
Read more
The "Gulden Roos", a project in Bruges nestles in an environment of alleys, squares and a central park garden. The project uses the same brick in different versions so that the whole residential block exudes a sense of unity.
Read more
Rigid joint covers for façades, walls and ceilings.
Extruded PVC or aluminium profile with dovetail for fastening using clips. The joint cover system is designed for indoor or outdoor wall and ceiling joints, in continuity with the floor joints.
If you have any questions, please contact your sales engineer, who will guide you in choosing the right joint cover.
2. Jointofeu bead
The Jointofeu bead is composed of silicate-based mineral fibres (bio soluble version) held in a glass braid. It is used to caulk the expansion joints in buildings. Fitting fire break joints between two elements allows the preservation or restoration of the fire resistance of the wall beside these joints.
The bead:
- does not absorb humidity
- is insensitive to all usual aggressive chemical agents
- contains no asbestos
- chemically neutral, does not degas any noxious gases in case of fire
The bead is glued to at least one of the joint lips with Jointofeu glue planned to this effect.
Preparation
- Position the clips by sliding them into the dovetail
- Position the alignment nipples
Fitting
- Position the profile fitted with clips opposite the space to fill
- Clear any formwork element opposite each clip:
by 10 x 40 mm for 15-35 clips
by 20 x 60 mm for 35-80 clips
- By pressing the hand on the profile, embed the clips so that the profile is pressed perfectly
