AFCAB certificate for MBT couplers
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
Leviat, a CRH company, is a global leader in connecting, fixing, lifting and anchoring technology for the construction industry.
Leviat’s engineered products and innovative construction solutions are used in a variety of market segments from residential to infrastructure, enabling users to build better, stronger, safer and faster.
3 000
employees
+60
sites worldwide
4
production on 4 continents
+30
sales in +30 countries
Blankenberge will soon have a brand-new sports complex and Leviat was allowed to contribute to
that.
We are particularly proud to announce that our MBT sleeve has received the AFCAB certification.
We imagine, model and make engineered products and innovative construction solutions for a dynamic industry. We support our partners in the long term to build better, safer, stronger and faster and help turn awe-inspiring architectural visions into reality.
Plaka Clamp is an edge formwork system placed at the top of the building's peripheral wall. This easy and quick to install formwork system allows easy casting of the compression screed or slab.
The shoes are made of steel, making them strong, and covered with a coat of epoxy paint to make them durable.
The spacers are made of aluminium. As the spacers remain on the wall after stripping, they must not produce any rust stains on the interior ceiling.
The Plaka-Clamp formwork can be combined with a railing solution using the same shoes. This Plaka Clamp railing system allows you to work quickly and safely. Please refer to the additional products listed below.
1. Fitting spacers and shoes on the load-bearing walls, every 60 cm. No drilling required. The shoe is blocked by a single nail, which is slid into the appropriate hole.
1. Adjusting plate allowing adjustment according to the thickness of your formwork board, varying between 27 and 63 mm (63 mm is the thickness of a baulk or a common rafter)
2. Adaptable reinforcement stiffener for making beams and lintels (used with straight spacers, see below)
3. Straight alu spacers for constructing collar beams. In this case we use 2 blocks, mounted opposite each other (available in several dimensions)
Plaka Clamp is an edge formwork system placed at the top of the building's peripheral wall. This easy and quick to install formwork system allows easy casting of the compression screed or slab.
The shoes are made of steel, making them strong, and covered with a coat of epoxy paint to make them durable.
The spacers are made of aluminium. As the spacers remain on the wall after stripping, they must not produce any rust stains on the interior ceiling.
The Plaka-Clamp formwork can be combined with a railing solution using the same shoes. This Plaka Clamp railing system allows you to work quickly and safely. Please refer to the additional products listed below.
1. Fitting spacers and shoes on the load-bearing walls, every 60 cm. No drilling required. The shoe is blocked by a single nail, which is slid into the appropriate hole.
1. Adjusting plate allowing adjustment according to the thickness of your formwork board, varying between 27 and 63 mm (63 mm is the thickness of a baulk or a common rafter)
2. Adaptable reinforcement stiffener for making beams and lintels (used with straight spacers, see below)
3. Straight alu spacers for constructing collar beams. In this case we use 2 blocks, mounted opposite each other (available in several dimensions)