Mapegrout SV Fiber 10.11.02
Add to my wish listMapegrout SV-HP Fiber is a one-component, ready-mixed powdered mortar made from special hydraulic binders, high-strength cement, synthetic polyacrylonitrile fibres and stiff steel fibres, selected aggregates and special additives according to a formula developed in the MAPEI research laboratories.
- High flexural and compressive strength
- Modulus of elasticity, thermal expansion coefficient and permeability coefficient similar to high quality concrete
- Impermeability to water
- Excellent adhesion to both old concrete, if dampened
with water before application, and to rebar, especially
if treated beforehand with Mapefer or Mapefer 1K - High resistance to impact loads
Do not add cement or admixes to Mapegrout SV-HP Fiber
Do not use Mapegrout SV-HP Fiber if the packaging is damaged
Do not add water once the mix has started to set
Do not apply Mapegrout SV-HP Fiber on asphalt or on surfaces treated with bitumen
Do not apply Mapegrout SV-HP Fiber on smooth surfaces Roughen the surface of the substrate (to at least 5 mm) and, if necessary, insert dolly rods
Do not use Mapegrout SV-HP Fiber if the temperature is lower than -5°C or higher +35°C
Mapegrout SV-HP Fiber hardens very quickly and it is recommended, therefore, to only mix quantities of mortar that will be applied within 10 minutes of adding the mixing water at +20°C
