Press seal HRK 05.09.10

P-Cable Basic HRK-SSG is the universal solution for sealing newly installed cables. These can be used in coring or standby tubes with a diameter of 100 or 150 mm.

6 versions are available according to the cored diameters and the diameters of the cables to pass.

Benefits

Adapts to all diameters thanks to its segment-based composition
Available with 1, 3, 4 or 6 holes
Cable/pipe diameter from 18 to 162 mm
Coring diameter of 100, 150 or 200 mm
Glass fibre reinforced polyamide press plate
Can be installed after the cables are passed in the hole

LEVIAT technical advice

The HRK ring can be placed in an HSI flask, provided that an appropriate adapter is used.
It is important to use the assembly kit to apply the right tightening torque to the pressure screws. The tightening torque to apply is indicated in the assembly manual supplied with the equipment.

+ Accessories

1. Assembly kit for HSH 150-DG and HRK SSG

2. Cable cleaner

3. Compensation ring for PVC standby

If a 110 mm single PVC pipe has been placed in a concrete shell, an HRK 100 ring can be adapted provided that an adapter (ordered separately) is placed. Also, in case of coring with a diameter of 110 mm, there is an adapter which allows standard rings to be used

Press seal HRK 05.09.10

Press seal HSD

Cable entry Segmento

Double wall insert HSI Varia

Wall sleeves (SFR/ZVR/FZR/FZRG)

Follow us