Securibat® anchor 11.06.08
Add to my wish listThis permanent anchoring device is used to stow safety equipment. (PPE, scaffolding suspended from the façades, nacelles, etc.).
It participates effectively in the integration of safety, not only during construction or rehabilitation, but also during maintenance interventions (D.I.U.O. - File of Subsequent Works on Installations).
Compliant with the NF EN 795 - AI standard.
It is embedded in the masonry upon construction or implanted after drilling a rehabilitation in the frame with a threaded rod and nut.
The company will assess the type of tube according to use.
Principle of fitting in rehabilitation type
A/ The wall drilling must be as perpendicular to the wall as possible.
B/ The drill hole is 34 mm diameter. It is followed with a bore on the inner side with a diameter of 45 mm and a depth of approx. 70 mm.
C/ Insert the anchor on the inner side.
D/ Check that the alignment between the plate / tapped hub alignment and the PVC sheath is correct (thanks to a Securibat Systems threaded rod, with a dimension equal to the overall length of the anchor +50 mm). The fitting of the threaded rod, as well as its screwing and unscrewing, must be performed easily, without friction or locking.
E/ Fasten the plate to the wall with two dowels and screws 8 mm in diameter (anticorrosion treated).
F/ Once the anchor has been fastened, check the alignment again.
G/ Remove the threaded rod. Fit the plug at the end of the PVC sheath as per the technical instructions.
Instructions for use for the Securibat Systems masonry anchor
1/ Remove the plug as per the technical instructions.
2/ Measure the anchor depth using a rule.
3/ Order a Securibat Systems threaded rod of a length equal to the anchor depth +50 mm by Securibat Systems. Only this make guarantees product compliance.
4/ Grease the end of the threaded rod before inserting it into the anchor.
5/ Screw the threaded rod fully by hand; the length is 30 mm, i.e. 7 and a half turns.
6/ Together with its nut, this anchor is now ready to receive the Securibat Systems working and protection equipment.
7/ Do not forget to refit the plug after us.
