The external PVC-P Nitril expansion joint allows the production of horizontal or vertical expansion joints (slab/slab or shell/shell). This joint withstands the presence of asphalt.
Benefits
Stretch at break ≥ 400 %, as per DIN EN ISO 527-2
At -20° C, stretch break is ≥ 200 %, as per DIN EN ISO 527-2
Traction strength ≥ 10 N/mm², as per DIN EN ISO 527-2
Shore hardness A 65 ± 5°, as per DIN 53505
PVC-P Meistermer withstands asphalt
LEVIAT technical advice
To help you to form the expansion joint above the membrane, use Plakasteel RBE
Straight welds can be made on the worksite using appropriate equipment:
1. Heating knife
2. Hot air gun
3. Heating blade
4. Vulcanisation tape
5. Fasteners, used for the temporary fastening of the joint to the reinforcements prior to concreting.
Angle and cross welding are difficult to perform on the worksite, which is why we offer to make these welds for you in our workshop. We can make your joint to measure in order to minimise welds on the worksite (according to your drawings and within the limit of transportability).
