Plaka-edge 04.15.12

Plakaedge is a slab edge lost formwork to be fitted in standby in beams and shells which are either prefabricated or cast on-site. Plaka-edge is used primarily in the prefabrication workshop or on-site, and is battery-mounted on the worksite. Suitable for a slab height of up to 40 cm.

Fibro edge is primarily used for interior insulation. Its properties are very close to those of concrete, allowing the application of single coat rendering on the façade. By precaution, it is best to include meshing along the edge to handle any microcracks.

Benefits

Avoids formwork and stripping of the edges on-site (safer and lower manpower cost)
Economical
Easy and quick fitting (Yield: 2 to 4 min./m with 2 persons)
High resistance to humidity and frost
Cement grey colour, can be rendered or painted.

LEVIAT technical advice

To date, no comment is available about this product

+ Installation guidelines

1. Cut the panels to length using a saw

2. Nail, screw or tighten the panels with dovetails onto your formwork

3. Place the top of the panel on the upper level of your future slab